Skyjacker Leaf Spring 1984-1991 Jeep Grand Wagoneer

Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it. Softride Leaf Spring; Lift Height 3-4 in.; Single; Fitment: Jeep Cherokee Base 1976 to 1983 Jeep Cherokee Chief 1981 to 1982 Jeep Cherokee Pioneer 1983 Jeep Cherokee S 1976 to 1977 Jeep Cherokee Wide Track 1978 to 1980 Jeep Cherokee Wide Track Chief 1983 Jeep Grand Wagoneer Base 1984 to 1991 Jeep Grand Wagoneer Limited 1984 to 1985 Jeep J10 Base 1974 to 1988 Jeep J20 Base 1974 to 1988 Jeep Wagoneer Base 1976 to 1982 Jeep Wagoneer Brougham 1982 to 1983 Jeep Wagoneer Custom 1976 Jeep Wagoneer Limited 1979 to 1983