Skyjacker Leaf Spring 1966-1974 Ford Bronco 4 Wheel Drive

Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it. Softride Leaf Spring; Lift Height 4.5 in.; Single; Fitment: Ford Bronco Base 1968 Ford Bronco Custom 1975 to 1977 Ford Bronco Northland 1975 Ford Bronco Ranger 1975 Ford Bronco Roadster 1968 Ford Bronco Sport 1975 to 1977