Skyjacker 3.5-4" SOFT 86.5-96 WRAN YJ

Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it. Rear Softride(R) springs are used to complete the SYSTEM in a Skyjacker(R) suspension lift. Fitment: Jeep Wrangler Base 1987 to 1993 Jeep Wrangler Islander 1988 to 1992 Jeep Wrangler Laredo 1987 to 1990 Jeep Wrangler Renegade 1991 to 1994 Jeep Wrangler Rio Grande 1995 Jeep Wrangler S 1988 Jeep Wrangler S 1991 to 1994 Jeep Wrangler Sahara 1988 to 1995 Jeep Wrangler SE 1994 to 1995 Jeep Wrangler Sport 1987 to 1988