Fabtech 11-16 Ford F250 4WD w/o Overload 8in Radius Arm System w/DL 4.0 Coilovers & Rear DL Shocks

Obtain maximum front suspension damping for Super Duty's with our Dirt Logic 4.0 Stainless Steel Coilover Conversion system. The upper coilover mounts are constructed with 1.75 diameter DOM tubing that replaces the factory coil spring mounts and span across a wide section of the frame for proper impact load distribution. The lower mounts are 1/4'' thick steel that attach to the axle housing, providing solid mounting points for the Dirt Logic 4.0 Stainless Steel Coilover piggyback reservoir shocks. Also included in this system are billet sway bar end links with heim ends and quad layer limiting straps. Includes rear 2.25 Dirt Logic Stainless Steel shocks. 8" RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 2011-16 FORD F250 4WD W/O FACTORY OVERLOAD TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/4 1/2" BS W/MINOR TRIMMING; TIRE SIZE - 355/65R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR. Fitment: Ford F-250 Super Duty Cabela's 2009 to 2010 Ford F-250 Super Duty FX4 2008 to 2009 Ford F-250 Super Duty Harley-Davidson Edition 2008 to 2010 Ford F-250 Super Duty King Ranch 2008 to 2016 Ford F-250 Super Duty Lariat 2008 to 2016 Ford F-250 Super Duty Platinum 2013 to 2016 Ford F-250 Super Duty XL 2008 to 2016 Ford F-250 Super Duty XLT 2008 to 2016 Ford F-350 Super Duty King Ranch 2014 Ford F-350 Super Duty Lariat 2014 Ford F-350 Super Duty Platinum 2014 Ford F-350 Super Duty XL 2014