EBC 2015+ Ford Mustang (6th Gen) 5.2L (GT350) Shelby Redstuff Rear Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports; muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 2015 and up FORD Mustang (6th Gen) 5.2 (GT350) Shelby Fits, Fitments 2015 Ford Mustang EcoBoost 2015 Ford Mustang EcoBoost Premium 2015 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015 Ford Mustang GT Premium 2015 Ford Mustang Shelby GT350 2015 Ford Mustang Shelby GT350R 2015 Ford Mustang V6 2016 Ford Mustang EcoBoost 2016 Ford Mustang EcoBoost Premium 2016 Ford Mustang GT 2016 Ford Mustang GT Premium 2016 Ford Mustang Shelby GT350 2016 Ford Mustang Shelby GT350R 2016 Ford Mustang V6 2017 Ford Mustang EcoBoost 2017 Ford Mustang EcoBoost Premium 2017 Ford Mustang GT 2017 Ford Mustang GT Premium 2017 Ford Mustang Shelby GT350 2017 Ford Mustang Shelby GT350R 2017 Ford Mustang V6 2018 Ford Mustang EcoBoost 2018 Ford Mustang EcoBoost Premium 2018 Ford Mustang GT 2018 Ford Mustang GT Premium 2018 Ford Mustang Shelby GT350 2018 Ford Mustang Shelby GT350R 2019 Ford Mustang Bullitt 2019 Ford Mustang EcoBoost 2019 Ford Mustang EcoBoost Premium 2019 Ford Mustang GT 2019 Ford Mustang GT Premium 2019 Ford Mustang Shelby GT350 2019 Ford Mustang Shelby GT350R 2020 Ford Mustang Bullitt 2020 Ford Mustang EcoBoost 2020 Ford Mustang EcoBoost Premium 2020 Ford Mustang GT 2020 Ford Mustang GT Premium 2020 Ford Mustang Shelby GT350 2020 Ford Mustang Shelby GT350R 2020 Ford Mustang Shelby GT500 2021 Ford Mustang EcoBoost 2021 Ford Mustang EcoBoost Premium 2021 Ford Mustang GT 2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1 2021 Ford Mustang Shelby GT500 2022 Ford Mustang EcoBoost 2022 Ford Mustang EcoBoost Premium 2022 Ford Mustang GT 2022 Ford Mustang GT Premium 2022 Ford Mustang Mach 1 2022 Ford Mustang Shelby GT500