BMR 93-02 F-Body Front Hollow 35mm Sway Bar Kit w/ Bushings - Red

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB001 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB001 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. BMR Suspension designed the SB001 sway bar kit for street performance, autocross, and road race applications. Fits 1993-2002 GM F-body;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;129% increase in sway bar rate (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 35mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A. Fitment: Chevrolet Camaro Base 1993 to 2002 Chevrolet Camaro Indianapolis 500 Pace Car 1993 Chevrolet Camaro RS 1996 to 1997 Chevrolet Camaro Z28 1993 to 2002 Chevrolet Camaro Z28 SS 1998 to 2002 Pontiac Firebird Base 1993 to 2002 Pontiac Firebird Formula 1993 to 2002 Pontiac Firebird Trans Am 1993 to 2002