The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB004 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 1.25-inch DOM tubing, the SB004 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB004 attaches to your Nova with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.
BMR Suspension designed the SB004 sway bar kit for street performance, autocross, and road race applications.
Fits First-Gen GM F-body and GM X-body;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;200% increase is sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 1.25-inch heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushing;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
Fitment:
Chevrolet Camaro Base 1967 to 1969
Chevrolet Camaro RS 1967 to 1969
Chevrolet Camaro SS 1967 to 1969
Chevrolet Camaro Z28 1967 to 1969
Chevrolet Nova Base 1969 to 1974
Chevrolet Nova Custom 1973 to 1974
Pontiac Firebird 350 1968 to 1969
Pontiac Firebird 350 HO 1969
Pontiac Firebird 400 1967 to 1969
Pontiac Firebird Base 1967 to 1969
Pontiac Firebird HO 1967
Pontiac Firebird Sprint 1967 to 1969
BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Black Hammertone
BMR Suspension
MSRP:
Was:
Now:
$271.99
(You save
)
(No reviews yet)
Write a Review
Write a Review
BMR Suspension
BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Black Hammertone
- SKU:
- 201650
- UPC:
- 887753325785
BMR Suspension
BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Red
MSRP:
Was:
Now:
$269.99
BMR Suspension
BMR 70-81 2nd Gen F-Body Front Solid 1.25in Sway Bar Kit w/ Bushings - Black Hammertone
MSRP:
Was:
Now:
$262.99
BMR Suspension
BMR 67-69 1st Gen F-Body 1.875in Front Sway Bar End Link Kit - Black
MSRP:
Was:
Now:
$53.99
BMR Suspension
BMR 67-69 1st Gen F-Body Bolt-On Subframe Connectors - Black Hammertone
MSRP:
Was:
Now:
$379.95
BMR Suspension
BMR 67-69 1st Gen F-Body T56 Six Speed Conversion Kit - Black Hammertone
MSRP:
Was:
Now:
$389.95
BMR Suspension
BMR 67-69 1st Gen F-Body Upper And Lower A-Arm Kit - Black Hammertone
MSRP:
Was:
Now:
$959.95
BMR Suspension
BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Black Hammertone
MSRP:
Was:
Now:
$269.95
BMR Suspension
BMR 93-02 F-Body Front Hollow 35mm Sway Bar Kit w/ Bushings - Black Hammertone
MSRP:
Was:
Now:
$339.95
BMR Suspension
BMR 67-69 1st Gen F-Body Convertible Only Driveshaft Tunnel Brace - Black Hammertone
MSRP:
Was:
Now:
$146.99
!