The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB051 rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch DOM steel tubing, the SB051 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB051 attaches to your Sixth Gen Camaro with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.
BMR Suspension designed the SB051 sway bar kit for street performance, autocross, and road race applications.
Fits 2016-Newer Chevrolet Camaro(excluding cars with ELSD);Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;52% increase in sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 1.25-inch heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
Fits, Fitments
2016 Chevrolet Camaro LT
2016 Chevrolet Camaro SS
2017 Chevrolet Camaro LT
2017 Chevrolet Camaro SS
2017 Chevrolet Camaro ZL1
2018 Chevrolet Camaro LS
2018 Chevrolet Camaro LT
2018 Chevrolet Camaro SS
2018 Chevrolet Camaro ZL1
2019 Chevrolet Camaro LS
2019 Chevrolet Camaro LT
2019 Chevrolet Camaro SS
2019 Chevrolet Camaro ZL1
2020 Chevrolet Camaro LS
2020 Chevrolet Camaro LT
2020 Chevrolet Camaro SS
2020 Chevrolet Camaro ZL1
BMR 16-17 6th Gen Camaro Rear Hollow 32mm Non-Adj. Sway Bar Kit - Red
BMR Suspension
$299.99
- SKU:
- 201706
- UPC:
- 887753326409