BMR 15-17 S550 Mustang Rear Cradle Bushing Kit (Polyurethane) - Red

Significantly reduce rear cradle movement in your S550 Mustang with a Polyurethane Rear Cradle Bushing Kit from BMR Suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking with only moderate increases in NVH. Each bushing is designed to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Poly Rear Cradle Bushing Kit (BK047) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving. Designed for street performance, drag race, and handling applications, BMR Suspension BK047 Poly Cradle Bushings are the perfect wheelhop solution for any S550 Mustang where NVH is not a concern. BMR's Rear Cradle Bushings reduce cradle movement over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These ?voids?, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR's poly cradle bushings replace the entire OE rubber bushing, minimizing differential movement by replacing the soft rubber OE bushings with solid two-piece poly bushings. This reduces cradle movement, reducing wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. BMR Suspension's BK047 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.! Designed for street performance, drag race, and handling applications, BMR Suspension BK047 Poly Cradle Bushings are the perfect wheelhop solution for any S550 Mustang where NVH is not a concern. Fits 2015-2017 S550 Mustangs ;Designed for street performance, drag race, and handling applications;95-durometer polyurethane cradle bushings;Oversized 6061-T6 billet aluminum inner bushing sleeves;Reduces bushing deflection;Greatly reduces wheelhop;3-4 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A. Fitment: Ford Mustang Bullitt 2019 to 2020 Ford Mustang EcoBoost 2015 to 2020 Ford Mustang EcoBoost Premium 2015 to 2020 Ford Mustang GT 2015 to 2020 Ford Mustang GT 50 Years Limited Edition 2015 Ford Mustang GT Premium 2015 to 2020 Ford Mustang Shelby GT350 2015 to 2020 Ford Mustang Shelby GT350R 2016 to 2020 Ford Mustang Shelby GT500 2020 Ford Mustang V6 2015 to 2017